Over the last few months, I’ve had engineer callouts to our dishwasher (7.5 years old), tumble dryer (13 years old) and washing machine (also 13 years old). All of these household appliances are heavily used but they’re also from good brands (Bosch/Siemens/Neff) and they’re generally going strong… I also managed to get them fixed for very little, in most cases… saving hundreds of pounds against the cost of a replacement.
Case 1: Dishwasher with error message E:24 or E:25
Neff’s E:24 and E:25 errors mean there’s something stopping the dishwasher from draining (generally a kinked hose, blocked filter or something obstructing the pump). Our machine would run the first few minutes of the cycle (a self-test, apparently) before failing with one of these messages.
Despite following advice on the ‘net, I couldn’t work out what it was (I gave the pipes a good clean – especially around where they outlet pipe was plumbed into the drain – and checked for objects blocking the impeller on the pump).
A £65 engineer call-out from a local firm checked the appliance over but the error returned – and so did the engineer. This time he did a more thorough job and, although he couldn’t find what had been preventing the machine from running, the error has gone so whatever it was has been dislodged and our dishes are getting cleaned (without spending a few hundred pounds on a new integrated dishwasher…). Total cost to repair: £65.
I didn’t use the video below (I used others at the time) but this is a pretty complete view of the process I followed, and I didn’t see the engineer do much more!
Case 2: Washing machine tripping electrical supply
A few minutes into the wash cycle, the electrical circuit would trip on our Bosch Classixx 1200 Express. I managed to run the drain cycle and remove the trapped washing. Then I tried plugging the washing machine into a different circuit but saw the same issue – so I knew it wasn’t a general problem with the supply but with the machine. A call to a local engineer (not the one I used for the dishwasher!) was all that was required to get this machine working again (he fitted a replacement heating element). Total cost to repair: just under £75 (including parts and labour).
Case 3: Condensing tumble dryer not heating fully and clothes damp at end of cycle
The engineer who fixed the washing machine didn’t work on condenser tumble dryers, so I had to call Siemens’ official engineers to fix our elderly TXL 733. With the engineer call-out charge and the list of parts required, I was looking at nearly £300. Definitely beyond economic repair! Reviews on new A++ energy-rated models with heat pumps were not great – so we went with another condenser (moving from C to B at least). This cost £95 for engineer call-out plus £299 for a new appliance, minus another £50 cashback (due soon) for buying another Siemens/Bosch appliance.
Incidentally, I didn’t buy from John Lewis (as I normally would) – Co-op Electrical delivered the new appliance the next day.
Case 4: Washing machine making a loud vibration noise
After paying out to get the machine fixed once, it was on borrowed time. No more engineer call-outs – at some point you have to cut your losses and buy a new appliance. For the last few washes, our machine has been incredibly noisy and after returning from holiday with a lot of loads to run, I was ready to have to buy a replacement today.
But, before ordering a new machine, I decided to search the Internet and, thanks to these two videos I found the problem – a shirt collar stiffener that had worked its way out of my shirt and into the workings of the machine!
Total cost to repair: £0.
Reduce, Reuse, Recycle, Replace Repair?
I may still have a teenage washing machine (and a dishwasher heading toward double digits too) but newer appliances are not built to last as long as these were. Maybe these quick and relatively cheap fixes can help others keep their appliances going for a bit longer…