I’ve been interested in having a play with an action camera for a while now. I figure I can get some fun footage on the bikes, as well as ski-ing next winter, and I missed not having a waterproof camera when I was lake-swimming in Switzerland a few weeks ago!
So, when I saw that a contact who had upgraded to the Hero 5 was selling his GoPro Hero 3 Silver Edition, I jumped at the opportunity.
My camera came to me with quite a few accessories and I picked up some more for not too much money at HobbyKing (shipped from China in 3 weeks – don’t pay GoPro prices for things like a tripod mount or a lens cover!).
Whilst getting used to the camera’s controls (oh yes, and opening the waterproof case for the first time), I came across some useful tips on the ‘net… including loads of videos from a guy called Bryn, whose new users guide was useful to make sure I had everything set up as I needed:
Once I had everything set up and a fast 64GB card installed, My first outing on a bike with the GoPro was helmet-mounted. That was OK, but it’s a bit weird having all that weight on your head and also not too handy for working out if the camera is running or not. Since then, I’ve got a bike mount so when my GoPro is mounted on my bike, I have it below the stem, which means technically it’s upside-down:
— Mark Wilson ???? (@markwilsonit) October 14, 2017
No worries – the Internet delivered another video telling me how to set the camera up for upside down recording:
One thing to watch out for is the battery life – don’t expect to be filling your memory card on a single battery – but it should last a while. It’s just that a GoPro isn’t going to work as a DashCam or similar (there are actually some good articles on the ‘net as to why you would probably want to use a specialist dashcam anyway – I have a NextBase 402G for that). Anyway, I don’t want to have to edit hours of footage so knowing I can only record a few minutes at a time is good for me (I have hours of recordings on MiniDV digital tape that have been waiting to be transferred to disk for years!).
I did recently use the GoPro to record some presentations at work: great for a wide angle view – but it got pretty warm being plugged into a power source the whole time (so again, a proper video camera would be the right thing to use – and don’t think about using a DSLR or a compact camera – I tried that too and they generally switch off after 20-30 mins to prevent overheating). One thing I found is that each video recorded on the GoPro is chopped into chunks of around 3.55MB (I was recording 1080p). The file naming is worth getting used to.
Each video uses the same number (0001, 0002, etc.) but you’ll find that the first one is named GOPR0001.MP4, the next is GP010001.MP4, then GP020001.MP4, etc. So, when selecting a group of files that relate to the same recording, look carefully at the index numbers (the date and time stamp should help too).
Also, depending on how you import the videos (i.e. copying directly rather than using an application like MacOS Image Capture), you may see some .THM and .LRV files. The GoPro support site explains that these are thumbnail and low-resolution video files respectively.
So, that’s a few things I’ve discovered over the last few weeks and just a little bit of GoPro tinkering. Please leave a comment if you’ve anything more to add!