Microsoft Surface Pro 3 refuses to power on: fixed with a handful of elastic bands

This content is 6 years old. I don't routinely update old blog posts as they are only intended to represent a view at a particular point in time. Please be warned that the information here may be out of date.

This week didn’t start well (and it hasn’t got much better either) but Monday morning was a write-off, as the Microsoft Surface Pro 3 that I use for work wouldn’t “wake up”.

I’d used it on Friday, closed the “lid” (i.e. closed the tablet against the Type Cover) and left it on a table all weekend. Come Monday and it was completely dead. I tried charging it for a while. I tried Power and Volume Up/Down combinations. I tried holding the power button down for 30 secs (at which point the light on the charging cable flashed, but that was all).

After speaking to colleagues in our support team, it seemed I’d tried everything they could think of and we were sure it was some sort of battery failure (one of my customers has seen huge levels of battery failure on their Surface Books, suspected to be after they were kept in storage for an extended period without having been fully shut down).

I was ready for a long drive to Stafford to swap it for another device, hoping that OneDrive had all of my data synced and that I didn’t get the loan Dell laptop with the missing key (I’m sure that’s a warning to look after our devices…).

Then I found a post on the Windows Central Forums titled “Surface Pro 3 won’t turn back on! – possible solution when all hope is lost”.

All hope was indeed lost. This had to be worth a read?

“My SP3 mysteriously stopped working yesterday morning. (Keep reading to the end for the solution that worked for me and maybe you too!)

It was fine the night before. […]

I spent the morning attempting to reboot the SP3. I thought maybe my charger wasn’t working even though I did see a white LED light on the adapter that connects to the Surface. I tried the hard reset, the 2-button reset, every combination of the volume up and down with the power button.

[…]

Finally, this morning, I caved in and call MS support. The tech said she would charge me $30 for a remote over the phone troubleshooting. I declined as I’ve tried everything I’ve found on the internet. Instead, I scheduled app with the MS store support in Garden City, NY (Roosevelt Field Mall).

I had the first or second app: 11:15am. The tech, I think his name was Adam, young guy in his 20’s. I told Adam my issue and that I’ve tried everything. I even had a USB LED light to show that the battery in my case wasn’t the problem. The USB LED light lit up for a few seconds when I pressed power. He said the problem was internal hardware and they there was no way to fix it. Since my SP3 was out of warranty, the only solution from MS was full replacement for $500. But, since I needed my files, a replacement won’t do me any good. So, the only other solution was have it sent to a third party data recovery place for $1000! They would basically destroy the SP3 and MS would then be unable to replace it.

Talk about bad options. Neither one seemed practical. I asked Adam if he’s seen this type of problem with any of the Surfaces before. He said maybe one or twice before. I was about to leave when another guy walked with his Surface, sat down next to me and said his Surface won’t boot up. I looked at Adam and I didn’t believe this was a rare issue with the Surface. MS probably train their techs to say that because they don’t want a class action law suit on their hand.

Anyway, just before I left, Adam, did say something, almost accidentally that I picked up. He said some guy had used a rubber band to hold down the power button for about a day and eventually the Surface woke up from sleep.

When I came home this afternoon, I was sure I had a $1100 paper weight with me. With nothing to lose, I took out some rubber bands and popsicle stick. I placed the popsicle stick flat against the power button and used the rubber band to apply pressure to keep the power button depressed the whole time. I can see the USB light connected to my Surface coming on and off as the power cycled. No sign of the Surface waking up.

Came back from dinner (that’s 5 hours later) and noticed the USB light didn’t come on and off any more. But still no sign the Surface was back. My 8 yr old sons comes into my office sees the contraption and says “what’s this” and pulls the popsicle stick off the Surface. I wasn’t even paying attention.

Lo and behold! the F—ing Surface logo flashed on the screen and booted up!!!!!
I immediately plugged in the charger and a backup HD and copied all my files!”

I was struggling to find any elastic bands at home but then, as the day’s post landed on my doormat, I thought “Royal Mail. Rubber bands!” and chased the postie down the street to ask if she had any spares. She was more than happy to give me a handful and so this was my setup (I don’t know what a “popsicle stick” is, but I didn’t need one):

A couple of hours later, I removed the bands and tried powering on the Surface Pro. I couldn’t believe it when it booted normally:

So, if your Surface Pro 3 (or possibly another Surface model) fails to power on, you might want to try this before giving up on it as a complete battery failure.

4 thoughts on “Microsoft Surface Pro 3 refuses to power on: fixed with a handful of elastic bands

  1. Strangely I have the same issue and got that article when googling it earlier this week. Didn’t work for me though, next try was the two hours in the freezer which didn’t work, Still fiddling with it though, frustrating devices.

  2. Sorry to hear it didn’t work for you Scott. I guess I was lucky… possibly different firmware too, though that won’t help you with an already dead device…

    Hope you get something fixed soon.

  3. Popsicles are frozen ice lollies… So basically the wooden sticks inside something like a magnum ice cream. Glad to hear that worked for you – it’s probably a battery level calibration issue, my Samsung Note 2 had issues with that, but usually in the other direction (you’d get to 50% battery and it would run out, because it wasn’t recognising the true capacity of the battery. That trick (hold down the button for ages) was the solution on that product too…

  4. Aha – I guessed it was something like that (re: popsicles) – thanks for the US cultural education Jon :-)

    Interesting analysis of what the underlying issue might be too… so an extended power reset could possibly fix lots of devices!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.