{"id":1264,"date":"2008-10-31T09:00:46","date_gmt":"2008-10-31T09:00:46","guid":{"rendered":"http:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm"},"modified":"2008-10-31T09:01:03","modified_gmt":"2008-10-31T09:01:03","slug":"disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows","status":"publish","type":"post","link":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm","title":{"rendered":"Disabling rogue server detection to avoid DHCP server activation in Windows"},"content":{"rendered":"<p>I&#8217;m finally in the process of switching off the Compaq Evo D510SFF PC which acted as my main server for many years until it <a href=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/01\/controlling-costs-when-buying-a-pc.htm\">was replaced earlier this year with some more suitable hardware<\/a> (a Dell PowerEdge 840).  Even though the Dell Server has been running for the last ten months, I&#8217;ve not found the time to move over a few critical services and, as I write this, the files are being transferred to my new <a href=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/netgear-readynas-low-cost-raid-storage-for-the-consumer.htm\">Netgear ReadyNAS<\/a> and the last two VMs are being converted for use with Hyper-V.<\/p>\n<p>There were a couple of infrastructure services to transfer too &#8211; DNS and DHCP.  One of the DHCP services that I wanted to run in my new infrastructure is to provide IP addresses to computers that are deliberately on a different network to my Active Directory (devices like my iPhone, the <a href=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/07\/configuring-a-cisco-ip-phone-for-voip-using-sip.htm\">Cisco IP Phone<\/a> on my desk, and guest computers using my Wi-Fi connection) but the DHCP server in Windows Server 2003 R2 wouldn&#8217;t serve clients until it had been authorised by Active Directory.  I didn&#8217;t want the DHCP server to even see AD (there is a firewall between them) but so I had to find a way to make Windows think that the server is authorised.<\/p>\n<p>It turns out that this occurs if the DHCP Server service is running on a workgroup server and it sees a domain-joined DHCP server on the network (for a few days during the transition, my clients could see the legacy, domain-joined, DHCP server and the new, workgroup-only, one on the same network).  The answer is to create a new registry value to disable rogue detection:<\/p>\n<p><code>Windows Registry Editor Version 5.00<\/p>\n<p>[HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\DHCPServer\\Parameters]<br \/>\n\"DisableRogueDetection\"=dword:00000001<\/code><\/p>\n<p>After restarting the DHCP Server service, my DHCP server sprang into life and started servicing clients.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I&#8217;m finally in the process of switching off the Compaq Evo D510SFF PC which acted as my main server for many years until it was replaced earlier this year with some more suitable hardware (a Dell PowerEdge 840). Even though the Dell Server has been running for the last ten months, I&#8217;ve not found the &hellip; <a href=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">Disabling rogue server detection to avoid DHCP server activation in Windows<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[],"tags":[101],"class_list":["post-1264","post","type-post","status-publish","format-standard","hentry","tag-windows-server-2003"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.7 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it\" \/>\n<meta property=\"og:description\" content=\"I&#8217;m finally in the process of switching off the Compaq Evo D510SFF PC which acted as my main server for many years until it was replaced earlier this year with some more suitable hardware (a Dell PowerEdge 840). Even though the Dell Server has been running for the last ten months, I&#8217;ve not found the &hellip; Continue reading Disabling rogue server detection to avoid DHCP server activation in Windows\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\" \/>\n<meta property=\"og:site_name\" content=\"markwilson.it\" \/>\n<meta property=\"article:published_time\" content=\"2008-10-31T09:00:46+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2008-10-31T09:01:03+00:00\" \/>\n<meta name=\"author\" content=\"Mark Wilson\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@markwilsonit\" \/>\n<meta name=\"twitter:site\" content=\"@markwilsonit\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Mark Wilson\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\"},\"author\":{\"name\":\"Mark Wilson\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"headline\":\"Disabling rogue server detection to avoid DHCP server activation in Windows\",\"datePublished\":\"2008-10-31T09:00:46+00:00\",\"dateModified\":\"2008-10-31T09:01:03+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\"},\"wordCount\":302,\"commentCount\":4,\"publisher\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"keywords\":[\"Microsoft Windows Server 2003\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\",\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\",\"name\":\"Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#website\"},\"datePublished\":\"2008-10-31T09:00:46+00:00\",\"dateModified\":\"2008-10-31T09:01:03+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2008\\\/10\\\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Disabling rogue server detection to avoid DHCP server activation in Windows\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/\",\"name\":\"markwilson.it\",\"description\":\"get-info -class technology | write-output &gt; \\\/dev\\\/web\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\",\"name\":\"Mark Wilson\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"width\":800,\"height\":800,\"caption\":\"Mark Wilson\"},\"logo\":{\"@id\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\"},\"description\":\"A Chartered IT Professional, with recent experience in technology leadership, IT strategy and practice management roles, Mark Wilson is an Enterprise Architect in the Advisory and Management Group at risual. During a career spanning more than two decades, Mark has gained widespread recognition as an expert in his field including both industry and national press exposure. In addition to certifications from Microsoft, VMware, Red Hat, The Open Group and Axelos, Mark held a Microsoft Most Valuable Professional (MVP) award for three years and is now part of the MVP Reconnect programme. Mark is also well-known on social media and maintains an award-winning blog.\",\"sameAs\":[\"http:\\\/\\\/www.markwilson.co.uk\\\/\",\"https:\\\/\\\/www.instagram.com\\\/markwilsonuk\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/markawilson\\\/\",\"https:\\\/\\\/x.com\\\/markwilsonit\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCWHlZCoHRTocdvtrOJ2IL4A\"],\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/author\\\/mark-wilson\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm","og_locale":"en_GB","og_type":"article","og_title":"Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it","og_description":"I&#8217;m finally in the process of switching off the Compaq Evo D510SFF PC which acted as my main server for many years until it was replaced earlier this year with some more suitable hardware (a Dell PowerEdge 840). Even though the Dell Server has been running for the last ten months, I&#8217;ve not found the &hellip; Continue reading Disabling rogue server detection to avoid DHCP server activation in Windows","og_url":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm","og_site_name":"markwilson.it","article_published_time":"2008-10-31T09:00:46+00:00","article_modified_time":"2008-10-31T09:01:03+00:00","author":"Mark Wilson","twitter_card":"summary_large_image","twitter_creator":"@markwilsonit","twitter_site":"@markwilsonit","twitter_misc":{"Written by":"Mark Wilson","Estimated reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#article","isPartOf":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm"},"author":{"name":"Mark Wilson","@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"headline":"Disabling rogue server detection to avoid DHCP server activation in Windows","datePublished":"2008-10-31T09:00:46+00:00","dateModified":"2008-10-31T09:01:03+00:00","mainEntityOfPage":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm"},"wordCount":302,"commentCount":4,"publisher":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"keywords":["Microsoft Windows Server 2003"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm","url":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm","name":"Disabling rogue server detection to avoid DHCP server activation in Windows - markwilson.it","isPartOf":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#website"},"datePublished":"2008-10-31T09:00:46+00:00","dateModified":"2008-10-31T09:01:03+00:00","breadcrumb":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.markwilson.co.uk\/blog\/2008\/10\/disabling-rogue-server-detection-to-avoid-dhcp-server-activation-in-windows.htm#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.markwilson.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"Disabling rogue server detection to avoid DHCP server activation in Windows"}]},{"@type":"WebSite","@id":"https:\/\/www.markwilson.co.uk\/blog\/#website","url":"https:\/\/www.markwilson.co.uk\/blog\/","name":"markwilson.it","description":"get-info -class technology | write-output &gt; \/dev\/web","publisher":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.markwilson.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":["Person","Organization"],"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468","name":"Mark Wilson","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","url":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","width":800,"height":800,"caption":"Mark Wilson"},"logo":{"@id":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1"},"description":"A Chartered IT Professional, with recent experience in technology leadership, IT strategy and practice management roles, Mark Wilson is an Enterprise Architect in the Advisory and Management Group at risual. During a career spanning more than two decades, Mark has gained widespread recognition as an expert in his field including both industry and national press exposure. In addition to certifications from Microsoft, VMware, Red Hat, The Open Group and Axelos, Mark held a Microsoft Most Valuable Professional (MVP) award for three years and is now part of the MVP Reconnect programme. Mark is also well-known on social media and maintains an award-winning blog.","sameAs":["http:\/\/www.markwilson.co.uk\/","https:\/\/www.instagram.com\/markwilsonuk\/","https:\/\/www.linkedin.com\/in\/markawilson\/","https:\/\/x.com\/markwilsonit","https:\/\/www.youtube.com\/channel\/UCWHlZCoHRTocdvtrOJ2IL4A"],"url":"https:\/\/www.markwilson.co.uk\/blog\/author\/mark-wilson"}]}},"jetpack_featured_media_url":"","jetpack-related-posts":[{"id":1545,"url":"https:\/\/www.markwilson.co.uk\/blog\/2009\/12\/migrating-infrastructure-services-to-a-windows-server-2008-r2-computer.htm","url_meta":{"origin":1264,"position":0},"title":"Migrating infrastructure services to a Windows Server 2008 R2 computer","author":"Mark Wilson","date":"Friday 11 December 2009","format":false,"excerpt":"Having built a low-power\u00c2\u00a0server to run my home infrastructure, I need to get moving on decommissioning the old virtual machines so I can turn off the Dell PowerEdge 840 that runs them. The first step was to migrate the Active Directory Domain Services from my existing Windows Server 2003 R2\u2026","rel":"","context":"In \"Microsoft Windows Server 2003 R2\"","block_context":{"text":"Microsoft Windows Server 2003 R2","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/windows-server-2003-r2"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":5163,"url":"https:\/\/www.markwilson.co.uk\/blog\/2014\/10\/raspberry-pi-infrastructure-server-dns-dhcp-tftp.htm","url_meta":{"origin":1264,"position":1},"title":"Raspberry Pi infrastructure server (DNS, DHCP, TFTP)","author":"Mark Wilson","date":"Monday 13 October 2014","format":false,"excerpt":"A long time ago, I used to run real servers at home - I had a Compaq Prosignia 300 for a while and then a Compaq (or maybe it was an HP) Proliant DL380\u00a0running in my garage.\u00a0Then, a\u00a0few\u00a0years back,\u00a0I stopped running my own mail server and\u00a0put all of the infrastructure\u2026","rel":"","context":"In &quot;Technology&quot;","block_context":{"text":"Technology","link":"https:\/\/www.markwilson.co.uk\/blog\/topic\/technology"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":179,"url":"https:\/\/www.markwilson.co.uk\/blog\/2005\/10\/migrating-dhcp-databases-between.htm","url_meta":{"origin":1264,"position":2},"title":"Migrating DHCP databases between Windows servers","author":"Mark Wilson","date":"Tuesday 11 October 2005","format":false,"excerpt":"One side effect of rebuilding the server that runs pretty much everything on my home network was that I had to migrate the DHCP database (twice - first to a virtual machine operating as a temporary server, and then back to the original hardware after it had been rebuilt). I\u2026","rel":"","context":"In \"Microsoft Windows 2000\"","block_context":{"text":"Microsoft Windows 2000","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/windows-2000"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":470,"url":"https:\/\/www.markwilson.co.uk\/blog\/2004\/03\/configuring-dhcp-option-60-for-pxe.htm","url_meta":{"origin":1264,"position":3},"title":"Configuring DHCP option 60 for PXE clients","author":"Mark Wilson","date":"Tuesday 23 March 2004","format":false,"excerpt":"I'm currently working to implement a standard operating environment (SOE) for a client's server infrastructure, using their preferred deployment platform - the HP ProLiant Essentials Rapid Deployment Pack (RDP), which is based on software provided by Altiris and is effectively a wrapper around the standard unattended build process, but uses\u2026","rel":"","context":"In \"Microsoft Windows\"","block_context":{"text":"Microsoft Windows","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/windows"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1605,"url":"https:\/\/www.markwilson.co.uk\/blog\/2010\/02\/installing-windows-from-a-network-server-without-windows-deployment-services.htm","url_meta":{"origin":1264,"position":4},"title":"Installing Windows from a network server without Windows Deployment Services","author":"Mark Wilson","date":"Wednesday 3 February 2010","format":false,"excerpt":"I'd like to start this post with a statement: Windows Deployment Services (WDS) is a useful role in Windows Server 2008 R2.\u00c2\u00a0 It's free (to licensed Windows users), supports multitasking, and is a perfectly good method of pushing Windows images to clients... Unfortunately that statement has a caveat: ... but\u2026","rel":"","context":"In \"Microsoft Windows\"","block_context":{"text":"Microsoft Windows","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/windows"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2254,"url":"https:\/\/www.markwilson.co.uk\/blog\/2010\/12\/using-dhcp-reserved-client-options-for-particular-clients.htm","url_meta":{"origin":1264,"position":5},"title":"Using DHCP reserved client options for certain devices","author":"Mark Wilson","date":"Thursday 30 December 2010","format":false,"excerpt":"I've been struggling with poor Internet connectivity for a while now - the speed is fine (any speed tests I conduct indicate a perfectly healthy 3-5Mbps on on \"up to 8Mbps\" ADSL line) but I frequently suffer from timeout, only to find that a refresh a few moments later brings\u2026","rel":"","context":"In \"ADSL\"","block_context":{"text":"ADSL","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/adsl"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1264","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=1264"}],"version-history":[{"count":0,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1264\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=1264"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=1264"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=1264"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}