{"id":5949,"date":"2015-09-07T12:00:26","date_gmt":"2015-09-07T11:00:26","guid":{"rendered":"http:\/\/www.markwilson.co.uk\/blog\/?p=5949"},"modified":"2015-10-13T19:52:08","modified_gmt":"2015-10-13T18:52:08","slug":"looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013","status":"publish","type":"post","link":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm","title":{"rendered":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013"},"content":{"rendered":"

I had an “interesting” problem on an Exchange server last week… I could access the Exchange Control Panel using https:\/\/localhost\/ecp but it I tried to use its externally-accessible namespace (which I needed to in order to run the Exchange Hybrid Configuration Wizard), it kept looping on the authentication prompt. The password was correct but it just came straight back to a prompt again…<\/p>\n

It turned out to be an issue with HTTP redirection in IIS and, following the MSExchangeGuru post on HTTP redirection issues with the ECP virtual directory<\/a>\u00a0I set up HTTP redirection on the Default Website but turned it off for OWA, ECP and the various other virtual directories. I also checked that SSL was not required for the PowerShell virtual directory.<\/p>\n

Bipin Giri’s post on configuring URL redirection in Exchange 2013<\/a> suggests I need to repeat the same steps for the Exchange Backend Server website too but I didn’t find that necessary (and I’m sure I’ve also read to leave that alone!).<\/p>\n

There’s a useful table in the MSExchangeGuru post that summarises the need for an HTTP redirect and whether SSL should be enabled for the website and for each virtual directory but it’s also worth knowing that Morten Nielsen has listed the default virtual directory settings for Exchange 2013<\/a> in great detail.<\/p>\n","protected":false},"excerpt":{"rendered":"

I had an “interesting” problem on an Exchange server last week… I could access the Exchange Control Panel using https:\/\/localhost\/ecp but it I tried to use its externally-accessible namespace (which I needed to in order to run the Exchange Hybrid Configuration Wizard), it kept looping on the authentication prompt. The password was correct but it … Continue reading Looping on the authentication prompt for the ECP virtual directory in Exchange 2013<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[218],"tags":[46,110],"class_list":["post-5949","post","type-post","status-publish","format-standard","hentry","category-technology","tag-exchange","tag-iis"],"yoast_head":"\nLooping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it<\/title>\n<meta name=\"description\" content=\"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it\" \/>\n<meta property=\"og:description\" content=\"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\" \/>\n<meta property=\"og:site_name\" content=\"markwilson.it\" \/>\n<meta property=\"article:published_time\" content=\"2015-09-07T11:00:26+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2015-10-13T18:52:08+00:00\" \/>\n<meta name=\"author\" content=\"Mark Wilson\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@markwilsonit\" \/>\n<meta name=\"twitter:site\" content=\"@markwilsonit\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Mark Wilson\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\"},\"author\":{\"name\":\"Mark Wilson\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"headline\":\"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013\",\"datePublished\":\"2015-09-07T11:00:26+00:00\",\"dateModified\":\"2015-10-13T18:52:08+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\"},\"wordCount\":234,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"keywords\":[\"Microsoft Exchange\",\"Microsoft Internet Information Server\\\/Services\"],\"articleSection\":[\"Technology\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\",\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\",\"name\":\"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#website\"},\"datePublished\":\"2015-09-07T11:00:26+00:00\",\"dateModified\":\"2015-10-13T18:52:08+00:00\",\"description\":\"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/2015\\\/09\\\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/\",\"name\":\"markwilson.it\",\"description\":\"get-info -class technology | write-output > \\\/dev\\\/web\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/98f61365e7c39d6be942174b8c4de468\",\"name\":\"Mark Wilson\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\",\"width\":800,\"height\":800,\"caption\":\"Mark Wilson\"},\"logo\":{\"@id\":\"https:\\\/\\\/i0.wp.com\\\/www.markwilson.co.uk\\\/blog\\\/uploads\\\/image-4.png?fit=800%2C800&ssl=1\"},\"description\":\"A Chartered IT Professional, with recent experience in technology leadership, IT strategy and practice management roles, Mark Wilson is an Enterprise Architect in the Advisory and Management Group at risual. During a career spanning more than two decades, Mark has gained widespread recognition as an expert in his field including both industry and national press exposure. In addition to certifications from Microsoft, VMware, Red Hat, The Open Group and Axelos, Mark held a Microsoft Most Valuable Professional (MVP) award for three years and is now part of the MVP Reconnect programme. Mark is also well-known on social media and maintains an award-winning blog.\",\"sameAs\":[\"http:\\\/\\\/www.markwilson.co.uk\\\/\",\"https:\\\/\\\/www.instagram.com\\\/markwilsonuk\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/markawilson\\\/\",\"https:\\\/\\\/x.com\\\/markwilsonit\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCWHlZCoHRTocdvtrOJ2IL4A\"],\"url\":\"https:\\\/\\\/www.markwilson.co.uk\\\/blog\\\/author\\\/mark-wilson\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it","description":"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm","og_locale":"en_GB","og_type":"article","og_title":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it","og_description":"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP","og_url":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm","og_site_name":"markwilson.it","article_published_time":"2015-09-07T11:00:26+00:00","article_modified_time":"2015-10-13T18:52:08+00:00","author":"Mark Wilson","twitter_card":"summary_large_image","twitter_creator":"@markwilsonit","twitter_site":"@markwilsonit","twitter_misc":{"Written by":"Mark Wilson","Estimated reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#article","isPartOf":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm"},"author":{"name":"Mark Wilson","@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"headline":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013","datePublished":"2015-09-07T11:00:26+00:00","dateModified":"2015-10-13T18:52:08+00:00","mainEntityOfPage":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm"},"wordCount":234,"commentCount":0,"publisher":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"keywords":["Microsoft Exchange","Microsoft Internet Information Server\/Services"],"articleSection":["Technology"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm","url":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm","name":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013 - markwilson.it","isPartOf":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#website"},"datePublished":"2015-09-07T11:00:26+00:00","dateModified":"2015-10-13T18:52:08+00:00","description":"Adjusting HTTP redirection (and SSL) to fix an issue with looping on the authentication prompt for the Exchange 2013 ECP","breadcrumb":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/looping-on-the-authentication-prompt-for-the-ecp-virtual-directory-in-exchange-2013.htm#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.markwilson.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"Looping on the authentication prompt for the ECP virtual directory in Exchange 2013"}]},{"@type":"WebSite","@id":"https:\/\/www.markwilson.co.uk\/blog\/#website","url":"https:\/\/www.markwilson.co.uk\/blog\/","name":"markwilson.it","description":"get-info -class technology | write-output > \/dev\/web","publisher":{"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.markwilson.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":["Person","Organization"],"@id":"https:\/\/www.markwilson.co.uk\/blog\/#\/schema\/person\/98f61365e7c39d6be942174b8c4de468","name":"Mark Wilson","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","url":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1","width":800,"height":800,"caption":"Mark Wilson"},"logo":{"@id":"https:\/\/i0.wp.com\/www.markwilson.co.uk\/blog\/uploads\/image-4.png?fit=800%2C800&ssl=1"},"description":"A Chartered IT Professional, with recent experience in technology leadership, IT strategy and practice management roles, Mark Wilson is an Enterprise Architect in the Advisory and Management Group at risual. During a career spanning more than two decades, Mark has gained widespread recognition as an expert in his field including both industry and national press exposure. In addition to certifications from Microsoft, VMware, Red Hat, The Open Group and Axelos, Mark held a Microsoft Most Valuable Professional (MVP) award for three years and is now part of the MVP Reconnect programme. Mark is also well-known on social media and maintains an award-winning blog.","sameAs":["http:\/\/www.markwilson.co.uk\/","https:\/\/www.instagram.com\/markwilsonuk\/","https:\/\/www.linkedin.com\/in\/markawilson\/","https:\/\/x.com\/markwilsonit","https:\/\/www.youtube.com\/channel\/UCWHlZCoHRTocdvtrOJ2IL4A"],"url":"https:\/\/www.markwilson.co.uk\/blog\/author\/mark-wilson"}]}},"jetpack_featured_media_url":"","jetpack-related-posts":[{"id":5057,"url":"https:\/\/www.markwilson.co.uk\/blog\/2013\/11\/customising-the-behaviour-of-exchange-2013-web-apps-ecpeacowa.htm","url_meta":{"origin":5949,"position":0},"title":"Customising the behaviour of Exchange 2013 web apps (ECP\/EAC\/OWA)","author":"Mark Wilson","date":"Wednesday 27 November 2013","format":false,"excerpt":"I've been spending quite a bit of time refreshing my technical knowledge of Microsoft Exchange recently and, aside from the detail of how the product works, I came across a couple of little nuggets that could be useful for admins working with the product. Force a connection to the Exchange\u2026","rel":"","context":"In "Technology"","block_context":{"text":"Technology","link":"https:\/\/www.markwilson.co.uk\/blog\/topic\/technology"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":5946,"url":"https:\/\/www.markwilson.co.uk\/blog\/2015\/09\/manually-removing-servers-from-an-exchange-organization.htm","url_meta":{"origin":5949,"position":1},"title":"Manually removing servers from an Exchange organization","author":"Mark Wilson","date":"Friday 4 September 2015","format":false,"excerpt":"I'm starting this blog post with a caveat: the process I'm going to describe here is not a good idea, goes against the advice of my colleagues (who have battle scars from when it's been attempted in a live environment and not gone so well) and is certainly not recommended.\u2026","rel":"","context":"In "Technology"","block_context":{"text":"Technology","link":"https:\/\/www.markwilson.co.uk\/blog\/topic\/technology"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":287,"url":"https:\/\/www.markwilson.co.uk\/blog\/2006\/05\/outlook-web-access-tips-and-tricks.htm","url_meta":{"origin":5949,"position":2},"title":"Outlook Web Access tips and tricks","author":"Mark Wilson","date":"Thursday 11 May 2006","format":false,"excerpt":"After I installed Exchange Server 2003 last weekend, I found that accessing Outlook Web Access (OWA) didn't prompt for any authentication - it simply displayed the contents of the currently logged on user's mailbox (if it was homed on Exchange Server 2003) or redirecting to the old Exchange Server 5.5\u2026","rel":"","context":"In \"Microsoft Exchange\"","block_context":{"text":"Microsoft Exchange","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/exchange"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":362,"url":"https:\/\/www.markwilson.co.uk\/blog\/2006\/05\/exchange-server-55-2003-migration.htm","url_meta":{"origin":5949,"position":3},"title":"Exchange Server 5.5-2003 migration gotchas","author":"Mark Wilson","date":"Tuesday 9 May 2006","format":false,"excerpt":"I've not been doing as much work with Exchange Server as I'd like in recent years; so when a friend asked me to help out with carry out an Exchange Server 5.5 to 2003 migration for one of his contacts I was happy to get involved (although I was slightly\u2026","rel":"","context":"In \"Microsoft Exchange\"","block_context":{"text":"Microsoft Exchange","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/exchange"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":356,"url":"https:\/\/www.markwilson.co.uk\/blog\/2005\/05\/overview-of-active-directory.htm","url_meta":{"origin":5949,"position":4},"title":"Overview of Active Directory Application Mode","author":"Mark Wilson","date":"Tuesday 3 May 2005","format":false,"excerpt":"I recently blogged about Microsoft Identity Integration Server (MIIS), which is Microsoft's platform for connecting directory enabled applications and facilitating identity management. For organisations that require flexible support for directory enabled applications and for which organisational constraints or schema issues prevent the use of Active Directory (AD), Microsoft has developed\u2026","rel":"","context":"In \"Microsoft Active Directory\"","block_context":{"text":"Microsoft Active Directory","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/active-directory"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":306,"url":"https:\/\/www.markwilson.co.uk\/blog\/2006\/07\/enabling-outlook-mobile-access-for.htm","url_meta":{"origin":5949,"position":5},"title":"Enabling Outlook Mobile Access for Exchange Server 2003","author":"Mark Wilson","date":"Friday 7 July 2006","format":false,"excerpt":"A few years ago I attended an Exchange Server 2003 overview presented by Microsoft UK and Conchango (where I subsequently worked for a while) and got to play with Outlook Mobile Access (OMA) using an emulated mobile phone connection. I was pretty impressed (these were the days before smartphones became\u2026","rel":"","context":"In \"Microsoft Exchange\"","block_context":{"text":"Microsoft Exchange","link":"https:\/\/www.markwilson.co.uk\/blog\/tag\/exchange"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts\/5949","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=5949"}],"version-history":[{"count":3,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts\/5949\/revisions"}],"predecessor-version":[{"id":6185,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/posts\/5949\/revisions\/6185"}],"wp:attachment":[{"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=5949"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=5949"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.markwilson.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=5949"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}